Now Reading
Choosing Shot Sizes and Chokes for Ruffed Grouse

Choosing Shot Sizes and Chokes for Ruffed Grouse

A shotgun with shotgun shells and a ruffed grouse on a table

Knowing how to choose shot sizes and chokes for ruffed grouse hunting can change through the season

Let’s be honest, there are a lot of mistakes that can be made while hunting upland game, particularly in the grouse woods where habitat is tight and dense.

It can be anything: a gun is too long or too heavy, a dog doesn’t hunt close or hold well, forgetting to prepare for a long walk in advance, and more. With all of the mistakes I’ve made and seen over the years, the one that’s overlooked the most often is the choke that’s screwed into the end of a hunter’s gun and how to choose shot sizes. This may sound simple; it might even sound like something that doesn’t matter. But believe me, having the right choke and choosing the right shot size is imperative for ruffed grouse hunting.

Breaking it down

Some hunters just grab the nearest box of ammo that fits in their gun and go without a second thought of how to choose shot sizes or choke sizes. With so many chokes available from so many manufacturers, and so many shot sizes to choose from, it can be a bit intimidating. 

Let’s talk about chokes and shot sizes for those just getting started.

Chokes

Shotgun chokes are screwed into the end of the barrel of the vast majority of shotguns floating about. If you own a shotgun that doesn’t have interchangeable chokes, this doesn’t apply to you. If your gun does have screw-in chokes, which are interchangeable, let’s talk about what chokes do.

Simply put, a choke is screwed into the end of the barrel and is smaller in diameter than the barrel itself. Chokes come in a variety of sizes or constrictions. The more constriction, the tighter the shot pattern will be as it leaves the last couple of inches of the barrel. Common chokes are cylinder, which has no constriction; improved cylinder, which is .010 inches smaller than the bore; modified, which is .020 inches smaller than the bore; and full, which is .035 inches smaller than the bore. Note, the tighter the choke, the tighter the pattern.

How to choose shot sizes

When it comes to choosing shot sizes, most ruffed grouse hunters would probably tell you that any shell from size 1 to 9 will kill a grouse. A lot of people don’t understand the makeup of a shotshell or what the numbers represent.

It breaks down like this: the higher the number, the smaller the diameter of the pellets. For example, No. 9 shot pellets will be less than .09 inches in diameter and will have a mass of less than 1 grain. On the other end of the spectrum, No. 1 shot pellets will have a diameter of .16 inches or larger, and a mass just shy of 6 grains. What does this mean? It means that a shell can hold a lot of No. 9 pellets and not a lot of No. 1 pellets. No. 9 shot loses velocity quickly, however, so each individual pellet isn’t nearly as strong as that of No. 1 shot. With the No. 1 shot, the pellets are stronger and retain more power at longer distances, but there aren’t a lot of pellets going toward the bird.

The common shot and choke choices

Most grouse hunters would say that an improved cylinder choke is ideal. For shot size, No. 6 shot is about as large as they would go and No. 9 is as small as they would go.

I’d go out on a limb and say that most grouse hunters use No. 7 1/2 or 8, as they are the most readily available and can be found anywhere at a reasonable price. Those choices are fine and dandy—and will kill grouse in most situations—but, as all grouse hunters know, the situations change drastically from early season to late season and vary from region to region.

How to change shot sizes and chokes with the leaves

Early season grouse hunting can be challenging—or downright frustrating. The leaves are still on the trees, the cover is thick, and the birds are tough to see when they rise. Dogs can disappear in the thickets, and by the time you find them on point, a bird may have adjusted eight times in an 80-yard stretch.

There are a lot of young birds around and the birds aren’t educated during the early part of the season. Flushes will be up close and personal and 10-30 yards are going to be the common shot distances, so the ability to aim precisely is out the window. It’s a point-and-shoot game. See the birds flush, point the barrel, pull the trigger. For this situation, a semi-open choke with a nice spread-out pattern is perfect. A skeet choke (slightly tighter than a cylinder or open bore) or improved cylinder works great with anything from No. 7 1/2 to 9 shot. This combination is going to give you a nice large pattern, which you’re going to need for those close-range shots. In the early season, I like an improved cylinder choke with No. 8 shot.

As the season draws on, the leaves fall and the woods begin to open up. Birds get warier and will flush farther out than those uneducated early-season birds. An improved cylinder choke will still do the trick nicely in most situations, but you might have a random bird flush through a clearing at 35-40 yards that your No. 8 shot just won’t take down. If that’s the case, then it’s time to up your game. Changing the choke to something like a modified or light modified choke (slightly less constriction than modified) or changing to a pellet with some more punch at longer distances is recommended. Both can be changed if need be. For mid-season birds, I like a modified choke with No. 7 1/2 shot.

Lastly, when late-season hits and all leaves are gone, the game is different. Birds aren’t hanging in the same areas once the snow falls. The shots are not only few and far between most days, but are much farther than they were earlier in the season. Once again, it’s time to up your choke/shot combo game. Even the thickest cover now appears open and vast. A modified choke with No. 6 shot isn’t a bad combo. Since you’re going to have time to line up shots and shoulder nicely, this combination will keep the pattern tight but the pellets will still be lethal at longer distances. I’ve even switched to a tighter constriction such as an improved modified to really get dialed in. For late-season birds, I like a modified choke with No. 6 shot.

Variables and suggestions

By no means do I intend for this to be your end-all-be-all guide to shot-gunning grouse from opener through Christmas. It’s just something to keep in mind. Earlier, I mentioned changes from region to region. Hunting grouse in Montana isn’t like hunting birds on the edge of the Canadian Shield in northern Minnesota. You need to adjust for the cover you’re hunting and go from there.

Patterning your shotgun with different chokes and different loads is important. It will help when choosing shot and choke sizes. Not only for you but to show respect for the king of fall. We all want to make clean, ethical shots—patterning and knowing your gun, chokes, and loads is one way of ensuring that.

A note about double barrels

If you’re lucky enough to own a double barrel with interchangeable chokes, you have the advantage of having two chokes ready. It’s nice when you have that tight flush where you need a big spread to hit the bird and a second bird flushes at a distance.

I like to choke my first barrel with whatever fits the season I’m in. My second barrel is always a step tighter in constriction, as my second shot is rarely as short as the first. For example, I’ll tote a double-barrel setup in early season hunting with a skeet choke in the first barrel and an improved cylinder in the second.

View Comments (6)
  • Matt, thanks for the information very helpful. Hunting Northern PA this weekend for Ruffed Grouse. Normally hunt in Western VA.

  • I know a majority of readers are from the mid west, I would really enjoy more content for the west. Its a whole different game at 10k feet.

  • I hunt north central PA where there is more woods than fields. IC choke and 7 1/5’s for early season and modified choke for later. To be honest most folks here are deer hunters and can’t be bothered with small game. More for me.

  • you make it sound more complicated than it should be. if you have a dog control it within 25 yrds . keep it in site. comunicate with your dog. you are working as a team. open chokes with small shot. cyl or skeet in right barrel im cyl or lite mod in left barrel. 28 ga 3/4 oz no 8.5, 16 ga 1 oz no 9 shot 20 ga 8.5 or 9 . 12 ga leave at home .one no 9 will kill a grouse. most of the time the bird is hit multible times . 8.5 s work and pattern great in 28 ga. no. 9 same in a 16 ga. bigger is not really better. i use a 28 sxs all season and dont change a thing all season. the key is to train your dog to hunt close, keep in cotact and in site. when the dog starts to run call it in and settle it down. 90 % of my shots are no more than 25 yrds. i am 74 yrs old and been hunting grouse and woodcock since i was 9 . i have had and trained 6 german shorthairs and live in northern, mn

  • you say i allready sent a message on this subject ? thats funny i dont see it in the comments ? when was that?

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.


©2014-2024 Project Upland Media Group, LLC. All rights reserved. Reproduction in whole or in part without the express permission of Project Upland is strictly prohibited.

Scroll To Top